Have your cake and eat it too with the Salt Creek SL series of tents. Featuring three doors(!) that offer double side doors with double vestibule storage plus one head-entry door with an awning-style entrance, this tent can do it all and then some all the while hitting the mark for a full-featured backpacking tent. Steep walls create ample shoulder space while the 3D bin pocket uses up dead space above the feet to create generous storage inside the tent.
Specs Sizing
| Trail Weight | 4lb 11oz / 2.13kg |
| Packed Weight | 5lb 2oz / 2.32kg |
| Fast Fly Weight | 3lb 11oz / 1.67kg |
| Packed Size | 21.5" x 7" / 55 x 18cm |
| Floor Area | 42ft² / 3.90m² |
| Head Height | 47" / 119cm |
| Vestibule Area | 9ft² / 9ft² / 0.84m² / 0.84m² |
| Footprint Weight | 11oz / 312g |
| Number of Seasons | 3 |
| Number of Doors | 3 |
- A full-featured tent designed with three doors--two side doors with vestibules, and one head-entry door with awning--and over-vertical side walls for maximum head and shoulder room, make this one of our most diverse backpacking tents
- Front entry drop-down door with awning-style vestibule creates extra venting on hot summer nights, an additional escape route, or extra storage space for pets and gear
- Four-way DAC hub creates vertical walls for increased living space
- Two dual-zipper side doors and two vestibules with storm flaps on the vestibule zippers
- Dual-zipper door is smooth closing and allows for easy entry. Use only one zipper for quick reach-through access.
- Quick Stash door keeper on tent body door makes stowing unzipped door quick and easy
- Media pockets enable clean earbud-cord routing from phones or other devices
- 3-D bin pocket utilizes dead space above feet for ample storage space
- One fly vent for increased airflow and reduced condensation
- Low Vent feature on the vestibule doors for more air flow while still providing vestibule coverage
- Ready to pitch; with pre-cut guylines and tensioners attached to fly
- Reflective guylines and webbing on tent corners
- Multiple interior loops for attaching gear lofts, accessories and mtnGLO® Tent & Camp Lights
- To extend the life of your tent floor we recommend using a Big Agnes footprint - sold separately
- Fly and floor are polyester rip-stop with 1500mm waterproof polyurethane coating
- Tent body is breathable polyester rip-stop and polyester mesh
- All seams taped with waterproof, solvent-free polyurethane tape (No PVC or VOC's)
- DAC Pressfit pole system
- Ultralight plastic clips attach tent body to pole frame
- 2 interior mesh pockets, 1 mesh ceiling , 1 3-D bin pocket, 8 lightweight aluminum hook stakes & 2 awning guylines
- Gear loft loops included
- Fits Large Trapazoid, Trapezoid, Square and Triangle Gear Lofts - sold separately
- 4-way high-volume hub pole design
